Our firearm builds

On this page you can find our firearms.

We build these firearms starting from original parts kits and manufacturing the receiver and installing a new US barrel (parts which cannot be imported).

If you cannot find your favourite firearm or it is not available, you can ask to build it for you. 

You pay nothing at the order, simply contact us and ask us for your build, as soon as your turn comes up we will contact you and give you a precise time estimate; you will also pay 50% advance and pay the rest at consignment.

HK53 clone 5,56 cal.

This is the clone of the HK53 SMG built by HK in the 80's during the Cold War. 

It is no more produced today. We build it using an original HK military bolt (never issued till they last) and a new US made barrel.

The best configuration for this gun is probably the pistol (8,5" barrel, MP5 length) and the 12" barrel  (possibily with 28" overall length in "firearm" length not including brace, which can mount a forward vertical grip).

 

Price is $1370 ($1350+$20 shipping) for the 8.5" pistol and 1430+$20 shipping for 12.5" gun/firearm with brace (not pictured).

 These guns are ready to build on order (about 30/35 days wait).

 

Order the HK53 clone in 5,56 mm. $1370 (incl. shipping.

Order the HK53 clone in 5,56 mm. $1450 (incl. shipping.


Sten MK3 take down

The task was not easy. The customer wanted a Sten Mk3 which could be disassembled like an MK2. 

As you probably know the MK3 was the cheap version of the Sten family and was completely pinned to save costs; this meant that the tropps could not maintain and was designed to be left back and taken to maintenance facilities which could remove the pin and repair it.

The troops hated it and the customer did not like a gun which could not be serviced in house so he asked us to male a MK2 and make it look like an MK3.

So we decided to make a 2 piece rib which would end in line once you screwed in the front barrel nut (or sleeve).

If you look attentively you can see a very small cut in the front rib. The threads on the front barrel nut (sleeve) had to be treated with anti seize paste because the rib is straight when the front sleeve is fully torqued into the receiver. 

Making the sleeve perfectly straight was a pain (the sleeve could fully torque left or right every time it was reassembled) but I think we did a good job. If you look attentively you can see a small cut in the front rib where the fornt rib aligns with the rear (receiver rib).

This gun can be build in less than 2 months and is based on an Indianapolis Ordnance system.

The finish is KG Kote HK Black, baked hotter on purpose to make it lightly gloss like the original finish (but much better). Price is around $1500/1700 depending on features (the Indy Ordnance system bolt/barrel /receiver costs $500).

Cetme MC51 clone (fixed brace version)


This is a gun we are particularly proud of, because it is very hard to build.

In the beginning of the 80's the SAS and SBS wanted a short version of the G3 to be able to hide it in the difficult Northern Ireland area of operations. 
HK never wanted to make it (because the g£ system does not lend itself to short barrels) and FR Ordnance and commissioned 20 guns to American armorer Bill Fleming (whi was building these already for the US market, mainly belt fed).

This gun has an impressive blast and provided a powerful pack which could be hidden under a coat.

It was substituted by the G3K and the HK53/53K, which we also build in clone form.

This gun is build starting from a Cetme parts kit but can be built from original HK parts on order (at higher price).

Price is $850 + $30 shipping = $880.

Ships to FFL only.


Interfor Cetme (G3) rifle clone

This is not the "standard" build of a CETME clone from a Cetme Parts kit.

We start from a  Cetme original parts kit, we add a full length 18" barrel but we shorten the loading tibe to Cetme K length.

The gun will shoot and performs like a full size CETME/G3 (having a full length barrel) but will be much lighter for traverse shooting giving you a marked advantage on moving targets. 

As for all of our builds, the hard parts is not to manufacture the gun but make it reliable. Especially with parts kits builds, usually only 50% of time is taken to build the gun and the other 50% is spent to fine tune the gun to make it reliable. And these guns are reliable like the original, sporting a US made new barrel , a new receiver (manufactured by us) and all like new original CETME parts.

 

Price $820 + $30 shipping = $850 all included.

 

Note: this gun is currently not available but can be built on order. Contact us to have a time frame and reserve your spot in line (usual waiting list about 1 month).


Interfor Cetme G3K rifle clone

This is probably our ost famouse build. We start from a Cetme Parts kit, add a 14" barrel (same length of G3K) and a 2" modern compensator.

The result is super handy gun, very nimble but with all the power of the famed 7,62 Nato.

A former SAS oerator told us they used these gun to keep the terrorist at bay in Northern Ireland in the eighties. You can use it for hogs or target shooting, surely a great "conversation piece" at the range.

 

This model has been test fired by Ken Eaton of Eaton Defense. See a video of his test at our front page.

 

Price $900+ $30 shipping = $930


Interfor MP5 Karbine clone, 9mm.

This is our 16" carbine with original HK retractable stock stock.

We build a normal clone of the famed MP5 with a new US Made 8.5" barrel and all original HK licensed parts (lower, bolt, bolt head etc.)

The we added a barrl extender (read fake suppressor) to a have a legal rifle with an original HK stock,

This gun is perfectly compatible with all HK accessories and can be easily converted to an MP5 SD style gun (fake suppressor) adding $150 more.

 

Price is $1300 + $30 shipping = $1300 total